Heavy Duty Above Frame Hoist

 


Heavy Duty Above Frame Hoist

  • 10” x 4” x 3/8” Mainframe
  • ½” x 3 ½” wear strip on top of mainframe tube and ½” x 3 ½” stiffener on bottom of tube
  • which makes the 3/8” tube stronger and lighter than a ½” tube.
  • Outboard Mounted Lift Cylinders
  • 50 Degree Dump Angle
  • 60,000 and 75,000 lb. Capacity
  • Dual Reeving Cylinders
  • Originally designed and introduced for CNG and LNG applications. AF Hoist is a great choice for 4 and 5 axle applications.
  • 2500 psi Operating Pressure

Heavy Duty Above Frame Hoist

Our Advantage

Outboard Supported Side Rollers

Greasable roller shaft is removable with two bolts for ease of replacement and maintenance.

The Tricep™ Lift Advantage

Allows our AF to operate at standard operating pressures not exceeding 2500 psi. Equally important, The Tricep enables us to build a hoist with dual reeving cylinders and outboard mounted lift cylinders signicantly reducing cylinder failure and life-cycle cost of the hoist.

Autofold DOT Bumpers

Bumper folds forward reducing the chance of bending and hang-ups in the landfill.

Outboard Mounted Lift Cylinders

Designed to cut overall wear on the hoist and cylinders, increasing it’s life and reducing maintenance costs.

Container Long Sill Support Rails

Rails aid in loading misaligned containers and give added support to the long sills increasing the life of your container.

Features

 

  • Originally designed and introduced for CNG and LNGapplications. AF Hoist is a great choice for 4 and 5 axle  applications.
  • 10” x 4” x 3/8” Mainframe
  • ½” x 3 ½” wear strip on top of mainframe tube and ½” x 3 ½” stiffener on bottom of tube which makes the 3/8” tube stronger and lighter than a ½” tube.
  • Outboard Mounted Lift Cylinders
  •  50 Degree Dump Angle
  • 60,000 and 75,000 lb. Capacity
  • Dual Reeving Cylinders
  • 2500 psi Operating Pressure

For the Ultimate in Container Securement, add “The Hooker” to your Roll Off Hoist. 

The Heavy Duty Above Frame Hoist can be paired with these Chassis and Containers

Product Specifications

* Cycle Times are Factory developed and controlled by PTO output, oil viscosity, human and mechanical efficiency, and may vary accordingly. All dimensions are subject to steel and manufacturing tolerances.

Literature

No listings found
Back to top