Short Extendable Tail Hoist


Short Extendable Tail Hoist

The Short Extendable Tail roll-off hoist has a 40” tail extension in lieu of the 80” extension. This hoist allows for low loading height for limited overhead clearance as well as the ability to pick up below ground level. This hoist is also available in the 8” mainframe and 2” sub frame and the 10” sub frameless hoist.

  • Combines the versatility of and outside rail hoist with the flexibility of an extendable tail
  • Auto fold DOT bumper standard on all models
  • Give operators the option of loading in areas with low overhead clearance
  • Inside controls standard reducing the chance of driver injury
  • Durable rear hinge designed to withstand the stress of grueling day after day use

Short Extendable Tail Hoist

Our Advantage

Outboard Supported Side Rollers

Greasable roller shaft is removable with two bolts.

Low Loading Angle

A forty inch tail provides a low loading angle and allows for a DOT/ICC fold up bumper.

Auto Fold Bumper (Hoist Down)

Bumper extends downward to normal position in the hoist down position.

Auto Fold Bumper (Hoist Up)

Bumper folds forward reducing the chance of bending and hang-ups in the landfill.

  • 8 x 4 x 1/2” Tube Main Frame
  • 4 x 3 x 3/16” Tube Sub Frame
  • 2 1/2” Diameter Rear Hinge
  • All Working Points Greasable
  • 1” Spring Loaded Container Locks
  • 2 1/2” Diameter Lift Cylinder Shafts
  • 10” Diameter Cable Sheaves
  • 52 Gallon Oil Reservoir
  • Suction Screen and Return Filter
  • Inside and Outside Controls
  • Sealed Lighting System
  • “The Hooker” Hold On Systems
  • Behind Cab and Oversize Oil Tanks
  • Tool Boxes
  • Auxiliary Stops
  • Poly or Steel Fenders
  • Tarping Systems
  • Ratchet Tie Down Straps
  • Pintle Hook
  • Front Mount Pump
  • PTO
  • Drop Shaft

For the Ultimate in Container Securement, add “The Hooker” to your Roll Off Hoist. 

The Short Extendable Tail Hoist can be paired with these Chassis and Containers

Product Specifications

* Cycle Times are Factory developed and controlled by PTO output, oil viscosity, human and mechanical efficiency, and may vary accordingly. All dimensions are subject to steel and manufacturing tolerances.


Bumper folds forward reducing the chance of bending and hang-ups in the landfill.


Rollers are bolted to the side of the frame, allowing for easier replacement and better support of the container.


No listings found
Back to top