The Hooker
A securement system that works on containers using 2″ x 6″ tubing long sills with the area above and outside open and free.
Cross member locations will not interfere with the hold capability of THE HOOKER provided they are 3″ or more in height.
THE HOOKER system is designed to be used with container in transport (lowered not raised) position only.
The Hooker
Our Advantage
Adaptable Design
If one Hooker arm is obstructed by a cross member, the other arm will engage and secure the container.
Low Profile
“The Hooker” is only 3” tall and folds down and out of the way for loading and unloading containers.
Flexible Mounting Location
Each Hooker is welded to the side of the hoist frame below the top of the side rollers at the location desired.
Easy to Maintain
All moving parts are greaseable and replaceable. The unit is also self cleaning to minimize operating maintenance.
Features
Each Kit Includes
- (2) sets of hold on arms, left and right
- (1) 4 way air control valve with mounting plate
- (2) quick release air valves
- Airline with fittings
- Installation Instructions
Installation
- 6 hours average installation.
- Some hoists could require relocating side rollers, etc.
- The cavity above the container long sill and between the cross member must be open to allow the hold on arms to engage.
- Damaged long sills or caved in floors may need repaired to allow room for “The Hooker”
The Hooker is compatible with Galfab’s entire line of Roll Off Hoists
