Jerr-Dan Standard Duty Rollbacks

Overcome even the toughest loading challenges with Jerr-Dan’s steel XLP-6 series available with *20′ to 22′ decks, including dual-angle models. The Steel XLP-6 features a low-profile subframe that lowers the deck height above the frame rail and provides greatly improved load angles. A dual-angle deck has a load angle as low as 7.5 degrees, while a conventional deck produces a load angle as low as 10.0 degrees. All XLP-6 models have a 12,000 lb. deck capacity and can be equipped with a 3,500 lb. wheel lift for extra versatility.

Standard Duty 6-Ton XLP Rollback Specifications

Features

• Load angles as low as *7.5°
• Lowest maintenance carrier in the world including No- Lube™ technology for slide pads and pivot joints
• Industry’s strongest aluminum bed featuring exclusive, Patented Galvanized Steel Beam Technology™

* Minimum load angle achieved with dual-angle
deck on air-ride chassis with air bags deflated.

Technology

• On-board hydraulic pressure gauges assists with troubleshooting
• Single sheet decking on conventional & dual angle steel deck reduces weld joints & potential corrosion points
• Combination winch cable guide roller/tensioner plate
• Manual or air-controlled winch-free spool
• Dual manual free spool
• Corrosion-resistant lightened dual control stations
• Federal Motor Carrier Safety Administration DOT 393 compliant crash protection headboard
• Most advanced, high performance hose/wire cable-tracking system in the industry
• Highest standard DOT reflectivity and lighting levels in the industry
  • 12 key slots standard 2 Front of deck, 6 Mid-Deck, 4 Rear of deck

Accessories

• Exclusive R.A.I.L™ System (Rear Awareness Indicator Lights)
• Industry’s strongest and most user-friendly SRS™ (Side Recovery System)
• Wireless remote with exclusive ARM™ (Actuated Remote Mechanism) system

• LED emergency lighting
• Multiple work light mounting locations
• 36”, 48”, 60” & 78” toolboxes, storage trays and baskets
• Automatic throttle-up on-demand (subject to chassis configuration)
• Galvanized sub frame and wheel lift components

 Deck

• Length: 20’, 21’, 22’
• Capacity: 12,000 lbs
• Width: 96”, 102”

Steel
– Conventional or dual angle
– 3/16” diamond or smooth decking
– Fixed or removable tubular side rails
– Removable blade side rails

Aluminum
– Conventional or dual angle
– Extruded 6061-T6 decking
– Fixed or Removable blade side rails

• Winch: 8,000 lb with 3/8” x 56’ wire rope
• 10,000 lb with 7/16” x 56’ wire rope

Wheel Lift

• Lift Capacity: 3,500 lbs
• Tow Capacity: 10,000 lbs
• Maximum Extended Reach: 68”
• Grounded Approach Angle: 3°

Optional XPL Carrier Auto Grids

• 84 in. Overall Width
• Counter Balance Valve in each Cylinder
• 3 in. Greaseable Pivot Pin
• 90 degree Crossbar Rotation
• Replaceable Wear Pads on Crossbar Ends and L-Arm Tips