JD50 Integrated Heavy Duty Wrecker

Name: Jerr-Dan JD50 Integrated Heavy Duty Wrecker
Brand: Jerr-Dan
Availability: InStock

100,000-lb 2- or 3-Stage Recovery Boom

An integrated heavy-duty wrecker built for serious recovery work, paired with your choice of 500 Series underlift — available through East Coast Truck & Trailer Sales in Portsmouth, VA.

Call (757) 465-2200

Jerr-Dan JD50 Integrated Heavy Duty Wrecker

2- & 3-Stage Recovery Boom & Winches

The JD50's 100,000-lb wrecker boom is available in a 2-stage or 3-stage configuration, backed by dual boom-mounted planetary winches for heavy-duty recovery work.

2-Stage Recovery Boom

Specification	Value
Rated Capacity @ 30° Retracted	100,000-lb
Rated Capacity @ 30° Extended	30,000-lb
Reach Past Tailboard — Extended @ 0°	174-in
Reach Past Tailboard — Extended @ 30°	115-in
Maximum Boom Angle	40°
Maximum Hook Height	290-in

3-Stage Recovery Boom

Specification	Value
Rated Capacity @ 30° Retracted	100,000-lb
Rated Capacity @ 30° Extended	20,000-lb
Maximum Boom Extension from Tailboard at Extended @ 0°	291-in
Maximum Boom Extension from Tailboard at Extended @ 30°	217-in
Maximum Boom Angle	40°
Maximum Hook Height	364-in

Winches & Wire Rope

Specification	Value
Rated Capacity — Dual Boom-Mounted Planetary Winches	50,000-lb each
Rated Working Load Limit — 3/4-in x 250-ft EEIPS Galvanized	18,500-lb each

Boom

100,000-lb retracted capacity, available as a 2- or 3-stage wrecker boom.

Underlift

500 series underlift options — low-profile 500LP, 530, or 565 (3- or 4-stage) — with up to 179-in of reach.

Body

Built with a polypropylene copolymer material that's high-impact resistant and corrosion-free.

Underlift Options

The JD50 is available with a choice of four 500 Series underlift configurations. Centerline of tandem axle to tailboard is 66-in across all models.

Specification	500LP	530	565	565 (4-Stage)
Rated Capacity – Retracted	50,000-lb	53,000-lb	56,500-lb	56,500-lb
Rated Capacity – Extended	17,000-lb	17,000-lb	17,600-lb	17,600-lb
Reach Past Tailboard – Retracted (Forks at Ground Level)	71-in	72-in	87-in	78-in
Reach Past Tailboard – Extended (Forks at Ground Level)	143-in	141-in	181-in	179-in
Positive Tilt	12°	12°	15°	15°
Negative Tilt	18°	18°	15°	15°
Tow Capacity	80,000-lb	80,000-lb	80,000-lb	80,000-lb

All four underlift configurations ship with 9 sets of frame forks and fork receivers included.

Chassis Recommendation

Minimum chassis requirements for mounting the JD50 Integrated Heavy Duty Wrecker.

Specification	Minimum Requirement
Minimum GVW Rating	64,000-lb
Minimum RBM Per Rail	4,200,000-in-lb
Minimum Front Axle Weight Rating	18,000-lb
Minimum Rear Axle Weight Rating	46,000-lb
Ride Height	12-in
Frame Height Maximum	45-in
Minimum After Frame Length	70-in

Standard & Optional Features

Full feature breakdown by category. Tap a category to expand.

Controls

Feature	Standard	Optional
Passenger Side Manual Controls with Passenger Side Hydraulic Pressure Gauges	•
Driver Side Electric over Hydraulic Paddle Controls	•
Driver Side Hydraulic Gauge		•
Color Coded Winch Control Handles	•
Color Coded Winch Sheave Guides and Hooks		•
Hydraulic Tank with Fluid Level Sight Gauge & Return Filter with Life Indicator	•
Non-Proportional Underlift Remote	•
Non-Proportional Boom/Winch/Underlift Remote		•
Proportional Boom/Winch Remote		•
Drivers Side Hydraulic Pressure Gauge		•
Touchlink In-Cab Underlift Controls		•

Body & Tunnel

Feature	Standard	Optional
Structural Polypropylene Copolymer Body	•
Anti-Skid Diamond Plate Walking Surface	•
Painted Roll-Up Doors and Door Frames	•
Forward Facing Diamond Plate on Tunnel Box		•
Storage Solutions for Tools and Equipment (Silver & Gold)		•

Lighting & Electrical

Feature	Standard	Optional
Integrated Electronic Distribution System	•
Touchlink Control System for Lighting and Winches with Integrated E-Stop	•
Interior Tool Box Lighting (LED)	•
Clear Body Marker Lights (LED)	•
Lighted Steps & Grab Handle (LED)	•
Upper Hook-Up Lights (LED)		•
Lower Hook-Up Lights (LED)		•
Upper Work Lights – Pylon Mounted (LED)		•
Underlift Hook-Up Light (LED)		•
Hood Mounted Flashers		•
Grille Mounted Flashers		•
Body Mounted Flashers		•
Main Light Bar		•
Wing Light Bars		•

Boom, Underlift & Winches

Feature	Standard	Optional
2-Stage Recovery Boom	•
3-Stage Recovery Boom		•
Boom Mounted D-Rings	•
Hydraulic Rear Spades with Flip Down Spade Foot	•
500LP Underlift, 143-in Reach	•
530 Underlift, 141-in Reach		•
565 (3-Stage) Underlift, 181-in Reach		•
565 (4-Stage) Underllift, 179-in Reach		•
5-in Crossbar Pivot Pin	•
Integrated Safety Chain Storage	•
Dual Planetary 50,000-lb 2-Speed Winches	•
Air Free Spool with Adjustable Rope Tensioner	•
Winch Camera with Control Station Monitors		•

Towing Accessories

Feature	Standard	Optional
7-Way Trailer Plug	•
Recessed Glad Hands	•
Service Air Quick Connect	•
9 Sets of Frame Forks with Fork Receivers (Included with Every Underlift Model)	•
Chain End Caps	•
Backup Camera		•
Rear Facing Underlift Camera		•
High Rise Fork Receivers		•
25K Bus Arms/Tire Lifts		•
5th Wheel Attachment		•
Pintle Hitch Attachment		•
Rigging Kits (Sling Kits, HD Chain Kits, Snatch Block Kits, & Shackle Kits)		•
Tunnel Box Counterweight Options		•

Accessories

Feature	Standard	Optional
Side Recovery System (35,000-lb Winch)		•
Side Stabilization System (SS-70-No Winch)		•
Stainless Steel Rubrail Dress Up Kit		•
Stainless Steel Pylon Dress Up Kit		•

Frequently Asked Questions

What's the difference between the 2-stage and 3-stage boom?

Both are rated at 100,000-lb at 30° retracted. The 2-stage extends to 30,000-lb at 30° with 174-in of reach past the tailboard and a 290-in max hook height. The 3-stage extends to 20,000-lb at 30° with 291-in of reach and a 364-in max hook height — more reach and hook height, at a lower extended capacity.

What underlift options are available on the JD50?

Four configurations: the 500LP (low profile, 143-in reach extended), the 530 (141-in reach extended), the 565 3-stage (181-in reach extended), and the 565 4-stage (179-in reach extended). All four carry an 80,000-lb tow capacity, and 9 sets of frame forks with receivers ship standard with every underlift model.

What chassis does the JD50 require?

A minimum 64,000-lb GVW rating, 4,200,000-in-lb RBM per rail, an 18,000-lb minimum front axle rating, and a 46,000-lb minimum rear axle rating. Frame height should not exceed 45-in, with a minimum after-frame length of 70-in.

What warranty comes with the JD50?

Jerr-Dan backs the JD50 with a 1-year full coverage warranty plus 5-year structural coverage. Visit jerrdan.com for full warranty details.

East Coast Truck & Trailer Sales

(757) 465-2200 ECTTS.COM