JD25 Integrated Heavy Duty Wrecker

Name: Jerr-Dan JD25 Integrated Heavy Duty Wrecker
Brand: Jerr-Dan
Availability: InStock

50,000-lb 2-Stage Recovery Boom

An integrated heavy-duty wrecker built for serious recovery work, paired with a 320 underlift — available through East Coast Truck & Trailer Sales in Portsmouth, VA.

Call (757) 465-2200

Jerr-Dan JD25 Integrated Heavy Duty Wrecker

2-Stage Recovery Boom & Winches

The JD25's 50,000-lb wrecker boom is a 2-stage design, backed by dual boom-mounted planetary winches for heavy-duty recovery work.

2-Stage Recovery Boom

Specification	Value
Rated Capacity @ 30° Retracted	50,000-lb
Rated Capacity @ 30° Extended	16,000-lb
Reach Past Tailboard — Extended @ 0°	134-in
Reach Past Tailboard — Extended @ 30°	88-in
Maximum Boom Angle	42°
Maximum Hook Height	238-in

Winches & Wire Rope

Specification	Value
Rated Capacity — Dual Boom Mounted Planetary Winches	25,000-lb each
Rated Working Load Limit — 5/8-in x 250-ft EIPS Galvanized	11,700-lb
Rated Working Load Limit — 5/8-in x 250-ft Synthetic	11,200-lb

Boom

50,000-lb retracted capacity, 2-stage wrecker boom.

Underlift

320 3-stage underlift with 32,000-lb retracted capacity and 131-in of reach.

Body

Built with a polypropylene copolymer material that's high-impact resistant and corrosion-free.

320 Underlift

The JD25 ships with the 320 3-stage underlift. Centerline of tandem axle to tailboard is 66-in.

Specification	Value
Rated Capacity – Retracted	32,000-lb
Rated Capacity – Extended	15,000-lb
Reach Past Tailboard – Retracted (Forks at Ground Level)	69-in
Reach Past Tailboard – Extended (Forks at Ground Level)	131-in
Positive Tilt	18°
Negative Tilt	12°
Tow Capacity	80,000-lb

Ships standard with 9 sets of frame forks and fork receivers included.

Chassis Recommendation

Minimum chassis requirements for mounting the JD25 Integrated Heavy Duty Wrecker, single or tandem axle.

Single Axle

Specification	Minimum Requirement
Minimum GVW Rating	31,000-lb
Minimum RBM Per Rail	2,500,000-in-lb
Minimum Front Axle Weight Rating	10,000-lb
Minimum Rear Axle Weight Rating	21,000-lb
Frame Height Maximum	45-in
Minimum After Frame Length	60-in

Tandem Axle

Specification	Minimum Requirement
Minimum GVW Rating	46,000-lb
Minimum RBM Per Rail	2,500,000-in-lb
Minimum Front Axle Weight Rating	10,000-lb
Minimum Rear Axle Weight Rating	36,000-lb
Ride Height	12-in
Frame Height Maximum	45-in
Minimum After Frame Length	70-in

Standard & Optional Features

Full feature breakdown by category. Tap a category to expand.

Controls

Feature	Standard	Optional
Passenger Side Manual Controls with Passenger Side Hydraulic Pressure Gauges	•
Driver Side Electric over Hydraulic Paddle Controls	•
Driver Side Hydraulic Gauge		•
Color Coded Winch Control Handles	•
Color Coded Winch Sheave Guides and Hooks		•
Hydraulic Tank with Fluid Level Sight Gauge & Pressure with Life Indicator	•
Non-Proportional Underlift Remote	•
Non-Proportional Boom/Winch/Underlift Remote		•
Proportional Boom/Winch Remote		•
Touchlink In-Cab Underlift Controls		•

Body & Tunnel

Feature	Standard	Optional
Structural Polypropylene Copolymer Body	•
Anti-Skid Diamond Plate Walking Surface	•
Painted Roll-Up Doors and Door Frames	•
Forward Facing Diamond Plate on Tunnel Box		•
Storage Solutions for Tools and Equipment (Bronze, Silver & Gold)		•

Lighting & Electrical

Feature	Standard	Optional
Integrated Electronic Distribution System	•
Touchlink Control System for Lighting and Winches with Integrated E-Stop	•
Interior Tool Box Lighting (LED)	•
Clear Body Marker Lights (LED)	•
Lighted Steps & Grab Handle (LED)	•
Upper Hook-Up Lights (LED)		•
Lower Hook-Up Lights (LED)		•
Upper Work Lights – Pylon Mounted (LED)		•
Underlift Hook-Up Light (LED)		•
Hood Mounted Flashers		•
Grille Mounted Flashers		•
Body Mounted Flashers		•
Main Light Bar		•
Wing Light Bars		•

Boom, Underlift & Winches

Feature	Standard	Optional
2-Stage Recovery Boom	•
Boom Mounted D-Rings	•
Hydraulic Rear Spades with Ground Compacting Spade Foot	•
320 Underlift, 131-in Reach	•
5-in Crossbar Pivot Pin	•
Integrated Safety Chain Storage	•
Dual Planetary 25,000-lb 2-Speed Winches	•
Air Free Spool with Adjustable Rope Tensioner	•
Winch Camera with Control Station Monitors		•

Towing Accessories

Feature	Standard	Optional
7-Way Trailer Plug	•
Recessed Glad Hands	•
Service Air Quick Connect	•
9 Sets of Frame Forks with Fork Receivers (Included with Every Underlift Model)	•
Chain End Caps	•
Backup Camera		•
Rear Facing Underlift Camera		•
High Rise Fork Receivers		•
25K Bus Arms/Tire Lifts		•
5th Wheel Attachment		•
Pintle Hitch Attachment		•
Rigging Kits (Sling Kits, HD Chain Kits, Snatch Block Kits, & Shackle Kits)		•
Tunnel Box Counterweight Options		•

Accessories

Feature	Standard	Optional
Side Recovery System (35,000-lb Winch)		•
Side Stabilization System (SS-70-No Winch)		•
Stainless Steel Rubrail Dress Up Kit		•
Stainless Steel Pylon Dress Up Kit		•

Frequently Asked Questions

What underlift comes on the JD25?

The JD25 ships with the 320 3-stage underlift, rated at 32,000-lb retracted and 15,000-lb extended, with 131-in of reach past the tailboard extended and an 80,000-lb tow capacity. 9 sets of frame forks and fork receivers are included.

How much can the JD25's boom lift?

The 2-stage recovery boom is rated at 50,000-lb at 30° retracted and 16,000-lb at 30° extended, with 134-in of reach past the tailboard at 0° and a 238-in maximum hook height.

What chassis does the JD25 require?

Single axle chassis need a minimum 31,000-lb GVW rating and 21,000-lb rear axle rating. Tandem axle chassis need a minimum 46,000-lb GVW rating and 36,000-lb rear axle rating. Both require 2,500,000-in-lb RBM per rail and a 45-in maximum frame height.

What warranty comes with the JD25?

Jerr-Dan backs the JD25 with a 1-year full coverage warranty plus 5-year structural coverage. Visit jerrdan.com for full warranty details.

East Coast Truck & Trailer Sales

(757) 465-2200 ECTTS.COM

25 Ton Heavy-Duty Wrecker